Image
Product code
Description
Manufacturer
Manufacturer code
Stock
Price
QTY
Liquid Level Controller
Level Controller for liquids in tanks. Switching-on relay in high level and switching-off in low-level values. When high level probes are submerged in liquid, a high-level indicator D7 goes on and this will result in initiation of P1 relay and LED D10 will light. Identically, intermediate level probes are also submerged in the liquid. The relay P1 will be on even when high-level probes are not submerged in the liquid. When the liquid level becomes lower than the intermediate level probes, a low-level LED D9 will light. This will result in tripping of relay P1. Power supply: 10~16V/100mA Low-level indicator. Intermediate-level indicator. High-level indicator. Relay-On
651.16 KB
HOBBY KIT
1572
3
pc
| 1+ | 16.90 BGN |
| 3+ | 15.70 BGN |
| 5+ | 14.70 BGN |
| 10+ | 13.80 BGN |
| view more | |
Photo relay
Photo relay sensor device. A photo resistor S1 is used as a sensor. An integrated circuit U1D is connected to perform the function of a voltage comparator. Trimmer TR1 for control the relay initiation threshold. LED D4 indicates relay on position. Power supply:
HOBBY KIT
1573
5
pc
| 1+ | 10.70 BGN |
| 3+ | 9.95 BGN |
| 5+ | 9.30 BGN |
| 10+ | 8.75 BGN |
| view more | |
Cable tester
Conductor tester for checking two or more conductors /in buildings or machinery/. Tester designed with integrated circuit LM324-U1 four functional amplifiers. D4 is used as a sensor and it initiates at the opposite end of the circuit under test. Pushing B1 pushbutton starts the tester. Power supply: 9V battery. Broken conductor indicator. Misconnected conductor indicator. Short-circuit conductor indicator. Normal conductors
HOBBY KIT
1575
4
pc
| 1+ | 7.60 BGN |
| 3+ | 7.00 BGN |
| 5+ | 6.50 BGN |
| 10+ | 6.05 BGN |
| view more | |
Time relay, 0-160 seconds
Time relay based on 555-U1. Relay reset is by pushbutton B2 and stand-by. Push B1 once to initiate relay for a defined period. Time set the relay by C4 capacitor and trimmer Tr1 Can be adjusted in the range 0 to 160 seconds. LD-LED indicates On/Off position of device. Power supply: 10~16V/100mA. Pushbutton ON. Emergency stop
HOBBY KIT
1580
4
pc
| 1+ | 9.20 BGN |
| 3+ | 8.50 BGN |
| 5+ | 7.95 BGN |
| 10+ | 7.45 BGN |
| view more | |
Time relay, 1-50 seconds
How it works : At the point of switch power ON , the timer delay starts . Upon expiry of the time , relay turns ON and remain in this position until power is OFF. At the point of switch off, the timer resets, ready for the next operation. Led indication for activated relay. Time delay between 1 and 50 seconds. Fully assembled. PVC box included. Dimensions : - PCB only - 49 x 29 mm. - Box - 55 x 35 x 20 mm. The output, is relay with : - Normally open contact - NO. - Normally closed contact - NC. Relay: 15А/125V DC, 15A/24V DC or AC, 10A/250V AC. Power supply - 10 to 14V
HOBBY KIT
1581
2
pc
| 1+ | 13.40 BGN |
| 3+ | 12.40 BGN |
| 5+ | 11.60 BGN |
| 10+ | 10.90 BGN |
| view more | |
Time relay, 1-50 seconds
How it works : At the point of switch power ON , relay turns ON the timer starts . Upon expiry of the time , relay turns OFF and remain in this position until power is OFF. At the point of switch off, the timer resets, ready for the next operation. Led indication for activated relay. Time delay between 1 and 50 seconds. Fully assembled. PVC box included. Dimensions : - PCB only - 49 x 29 mm. - Box - 55 x 35 x 20 mm. The output, is relay with : - Normally open contact - NO. - Normally closed contact - NC. Relay: 15А/125V DC, 15A/24V DC or AC, 10A/250V AC. Power supply - 10 to 14V
HOBBY KIT
1582
> 10
pc
| 1+ | 13.40 BGN |
| 3+ | 12.40 BGN |
| 5+ | 11.60 BGN |
| 10+ | 10.90 BGN |
| view more | |
Cycle time relay, 1-120 seconds or minutes
This device is a relay, working as cyclic timer (cyclic time relay). Operating mode is as follow: Work, Pause, Work, Pause etc… You can adjust working and pause time between 1 and 120 seconds or minutes. When power is on (LED Power is on), the relay closed (LED Relay is on) and keep that position, until end of set ON time (Work), then relay is deactivated (LED Relay is off) for the set OFF time (Pause) . When off time end - cycle repeat from beginning and so on. Work time (ON relay) and pause time (OFF relay) are adjusted independently. The two times are independent, ie be regulated separately. The time is from 1 to 120 seconds or minutes. Times is adjusted by two trimmer potentiometer. Potentiometer “WORK“ adjust devise working time - between 1 and 120 seconds or minutes. To switch between seconds and minutes use jumper. Settings must be done when power is off. Potentiometer “PAUSE“ adjust devise pause time - between 1 and 120 seconds or minutes. To switch between seconds and minutes use jumper. Settings must be done when power is off. Dimensions for PCB - 68x30mm. The output, is relay with: - Normally open contact - NO. - Common contact - COM. - Normally closed contact - NC. Power supply - 10 to 14 V DC. Relay: 15А/125V DC, 15A/24V DC or AC, 10A/250V AC. Cycle Time Relay - assembled Product Code: 1583 Availability: In Stock Tags: cycle time relay - assembled, 1583, modules, new
355.97 KB
HOBBY KIT
1583
6
pc
| 1+ | 16.20 BGN |
| 3+ | 15.10 BGN |
| 5+ | 14.10 BGN |
| 10+ | 13.30 BGN |
| view more | |
Time relay, positive pulse activate 1 to 50 sec (with box)
How it works: When the power is on, timer waiting triggering impulse + 12V (green cable). Upon receipt of the impulse, relay turns on and remained in that position until the set time expires. After the time expires the relay is turned off and remains ready (waiting triggering pulse). Led indication for activated relay. Time delay between 1 and 50 seconds. Dimensions: - PCB only - 49x29mm. - Box - 55x35x20mm. The output, is relay with: - Normally open contact - NO. - Common contact - COM. - Normally closed contact - NC. Power supply - 10 to 14 V DC. Current in standby (relay is turned off) - 8mA, current with activated relay (relay turned on) - 48mA. Relay: 15А/125V DC, 15A/24V DC or AC, 10A/250V
216.28 KB
HOBBY KIT
1584
11
pc
| 1+ | 13.40 BGN |
| 3+ | 12.40 BGN |
| 5+ | 11.60 BGN |
| 10+ | 10.90 BGN |
| view more | |
Alarm system with code (keyboard 3x4)
Alarm system for home-alert. Based on a PIC16F628 micro controller. 3 zones: - Zone 1 - lag /door/ - Zone 2 - instant /volume sensor/ - TMP Zone - 24-hour security for cable circuits and the system itself. Two 4-digit codes: - user code - ON/OFF position of the system - engineering code - for programming Re-setting of input, output and alarm signal time, re-setting of the user and engineering codes. Input time: 5, 10 and 20 sec. Output time: 10, 20 and 30 sec. Alarm signal time: 30, 60 and 120 sec. Mode /Ringer/ - when zone one is activated /the door opens/ - a sound signal will alarm -Sound and light indication. -Keyboard with 12
HOBBY KIT
1585
4
pc
| 1+ | 37.50 BGN |
| 3+ | 35.20 BGN |
| 5+ | 33.20 BGN |
| 10+ | 31.50 BGN |
| view more | |
HOBBY KIT
1603
4
pc
| 1+ | 15.90 BGN |
| 3+ | 14.80 BGN |
| 5+ | 14.00 BGN |
| 10+ | 13.20 BGN |
| view more | |
HOBBY KIT
1605
5
pc
| 1+ | 15.90 BGN |
| 3+ | 14.80 BGN |
| 5+ | 14.00 BGN |
| 10+ | 13.20 BGN |
| view more | |
HOBBY KIT
1606
3
pc
| 1+ | 15.90 BGN |
| 3+ | 14.80 BGN |
| 5+ | 14.00 BGN |
| 10+ | 13.20 BGN |
| view more | |
HOBBY KIT
1611
4
pc
| 1+ | 14.50 BGN |
| 3+ | 13.50 BGN |
| 5+ | 12.60 BGN |
| 10+ | 11.90 BGN |
| view more | |
HOBBY KIT
1612
2
pc
| 1+ | 14.50 BGN |
| 3+ | 13.50 BGN |
| 5+ | 12.60 BGN |
| 10+ | 11.90 BGN |
| view more | |
HOBBY KIT
1691
5
pc
| 1+ | 6.90 BGN |
| 3+ | 6.35 BGN |
| 5+ | 5.85 BGN |
| 10+ | 5.45 BGN |
| view more | |
HOBBY KIT
1693
2
pc
| 1+ | 9.60 BGN |
| 3+ | 8.90 BGN |
| 5+ | 8.30 BGN |
| 10+ | 7.80 BGN |
| view more | |
HOBBY KIT
1701
1
pc
| 1+ | 11.40 BGN |
| 3+ | 10.60 BGN |
| 5+ | 9.90 BGN |
| 10+ | 9.35 BGN |
| view more | |
SIRIUS PCB
7373
4
pc
| 1+ | 16.90 BGN |
| 3+ | 16.00 BGN |
| 5+ | 15.30 BGN |
| 10+ | 14.70 BGN |
| view more | |
LED Chaser - BLUE
8 Channel Chaser with PIC microcontoller. 12 programs + demo program. Demo for all programs. Speed control by trimmer-potentiometer. Button for choosing the program. Power supply: 8-14V Memory for last selected program. PCB dimensions 74x36.5
93.38 KB
HOBBY KIT
9910B
1
pc
| 1+ | 16.90 BGN |
| 3+ | 15.70 BGN |
| 5+ | 14.70 BGN |
| 10+ | 13.90 BGN |
| view more | |
LED Chaser - YELLOW
8 Channel Chaser with PIC microcontoller. 12 programs + demo program. Demo for all programs. Speed control by trimmer-potentiometer. Button for choosing the program. Power supply: 8-14V Memory for last selected program. PCB dimensions 74x36.5
93.38 KB
HOBBY KIT
9910Y
1
pc
| 1+ | 16.90 BGN |
| 3+ | 15.70 BGN |
| 5+ | 14.70 BGN |
| 10+ | 13.90 BGN |
| view more | |
61.98 KB
HOBBY KIT
9918B
1
pc
| 1+ | 6.20 BGN |
| 3+ | 5.70 BGN |
| 5+ | 5.25 BGN |
| 10+ | 4.89 BGN |
| view more | |
61.98 KB
HOBBY KIT
9918R
1
pc
| 1+ | 6.20 BGN |
| 3+ | 5.70 BGN |
| 5+ | 5.25 BGN |
| 10+ | 4.89 BGN |
| view more | |
61.98 KB
HOBBY KIT
9918W
1
pc
| 1+ | 6.20 BGN |
| 3+ | 5.70 BGN |
| 5+ | 5.25 BGN |
| 10+ | 4.89 BGN |
| view more | |
Programmable controller for lighting effects 1-10 channels
Controller for LEDs or LED modules management /advertising signs, decoration of rooms and buildings, etc./. Can manage from 1 to 10 channels. Up to 29 different effects as per chosen number of channels /pre-set in controller memory/. Each effect can be repeat 1 to 10 times separate from others. Effects speed adjustment . Channel selection from 1 to 10. Number effects in same time – as per selected numbers of channels. Repeating for each effect – from 1 to 10 times. Power supply: 8-18 VDC Maximum current: 10A SB1 and SB2 - programming buttons. SB3- button RESET for restoring factory settings /10 channels, all 29 shows the effect/. R1 Trimmer-potentiometer for speed control. Possible to upgrade effects by changing EEPROM 24Cxxx. PCB dimensions: 134x68
HOBBY KIT
9980
2
pc
| 1+ | 59.80 BGN |
| 3+ | 56.30 BGN |
| 5+ | 53.40 BGN |
| 10+ | 50.90 BGN |
| view more | |
1 Channel Lights Show LED Controller
PIC microcontoller. 7 programs. Button - choice program. Power supply DC - 8 to 25V. LED module ready for DC 12V. Current depends on the number of used LED module (LEDs). Max 5A. Memory - remember last selected program. Overall dimensions PCB - 58mm (2.29") x 35mm
142.9 KB
HOBBY KIT
9981
2
pc
| 1+ | 14.80 BGN |
| 3+ | 13.70 BGN |
| 5+ | 12.90 BGN |
| 10+ | 12.10 BGN |
| view more | |
0700 18 880
Copyright 2004-2024, Panda III Co., Ltd. All rights reserverd.